Furnace Repair Costs
Furnace repair costs vary based on which component has failed and the labor time required. The prices below reflect typical ranges for Licking County homeowners. We always provide a free estimate before any work begins.
| Repair / Component | Typical Cost Range |
|---|---|
| Flame sensor cleaning | $80 – $150 |
| Igniter replacement | $150 – $300 |
| Thermocouple replacement | $100 – $200 |
| Capacitor replacement | $120 – $250 |
| Pressure switch | $150 – $300 |
| Control board replacement | $300 – $600 |
| Blower motor replacement | $400 – $700 |
| Heat exchanger replacement | $800 – $1,500+ |
| Diagnostic / service call | $75 – $125 |
→ Learn more about our Furnace Repair service
Furnace Replacement Costs
New furnace installation costs in Licking County depend on system size (BTU output), efficiency rating (AFUE), and installation complexity. Prices below include equipment and standard installation labor.
| System Type | Installed Cost Range |
|---|---|
| Standard efficiency gas furnace (80% AFUE) | $2,500 – $3,800 |
| High-efficiency gas furnace (95–98% AFUE) | $3,200 – $5,500 |
| Electric furnace | $1,800 – $3,500 |
| Furnace + AC replacement (together) | $6,000 – $12,000 |
* Replacing both systems together reduces total labor cost and ensures matched efficiency ratings.
→ Learn more about HVAC Installation
Air Conditioner Repair Costs
AC repairs range from simple capacitor swaps to refrigerant leak repair. The most expensive single repair — compressor replacement — often tips the math toward system replacement on older units.
| Repair / Component | Typical Cost Range |
|---|---|
| Capacitor replacement | $120 – $300 |
| Contactor replacement | $100 – $250 |
| Refrigerant recharge (R-410A) | $200 – $500 |
| Refrigerant leak detection and repair | $250 – $600 |
| Evaporator coil cleaning | $150 – $300 |
| Condenser coil cleaning | $100 – $250 |
| Fan motor replacement | $300 – $600 |
| Compressor replacement | $1,200 – $1,800 |
| Diagnostic / service call | $75 – $125 |
→ Learn more about our AC Repair service
Air Conditioner Replacement Costs
New central AC installation in Licking County is sized by the home's square footage and load calculation. Oversized or undersized units create comfort and efficiency problems — proper sizing matters.
| System Size / Type | Installed Cost Range |
|---|---|
| 2-ton central AC (up to ~1,000 sq ft) | $3,000 – $4,500 |
| 3-ton central AC (~1,000–1,800 sq ft) | $3,500 – $5,500 |
| 4-ton central AC (~1,800–2,500 sq ft) | $4,000 – $6,500 |
| 5-ton central AC (2,500+ sq ft) | $4,500 – $7,500 |
| High-SEER2 (18+) premium efficiency unit | Add $500 – $1,500 to above ranges |
Heat Pump Costs
Heat pumps provide both heating and cooling from a single system. They're most efficient in mild conditions and increasingly popular in Ohio as a complement to or replacement for gas heating.
| Heat Pump Service | Typical Cost Range |
|---|---|
| Heat pump repair (most common) | $150 – $600 |
| Reversing valve replacement | $500 – $1,000 |
| Refrigerant recharge | $200 – $500 |
| New heat pump installation (air-source) | $4,500 – $8,500 |
| Dual-fuel system (heat pump + gas backup) | $6,000 – $11,000 |
| Mini-split (single zone, ductless) | $2,500 – $5,000 |
| Mini-split (multi-zone, 2–4 zones) | $5,000 – $12,000 |
→ Learn more about our Heat Pump service
What Affects HVAC Pricing in Licking County
Several factors can push costs higher or lower than the ranges above:
Factors That Affect Your Final Cost
- System size — larger homes require more capacity
- Efficiency rating — higher AFUE/SEER2 costs more upfront, saves on bills
- Ductwork condition — modifications or repairs add to installation cost
- Accessibility — attic, crawlspace, or tight utility room installs take longer
- Electrical upgrades — some systems require panel or wiring work
- Permit requirements — standard for new installations in Licking County
- Brand and product tier — builder-grade vs. premium equipment
The only way to get an accurate number for your specific home is a free in-person estimate. We size systems correctly, explain your options clearly, and give you a firm price before any work begins.